Raytools XC3000S Series, Руководство по вводу в эксплуатацию, Страница: 136 / 138

XC3000S Series Laser Cutting
S
y
stem Commissioning Manual
92
Return origin
direction and type Positive,
Limit Positive: When returning origin, move in the positive direction to
find the return to zero reference switch.
Reverse: When returning origin, move in the negative direction to
find the return to zero reference switch
Limit: Use the limit as the return origin reference switch
Zero position: Use zero position as the return origin reference
switch
Return origin
speed 0. 12m/min Speed of finding the reference signal when returning origin
Back distance 5 mm Distance from zero return to limit signal setback
Coordinates aft
backward set as 0 Coordinate value of the reference switch in the coordinate
system
Origin point offset
compensation 0mm The current point as the zero point; commissioning without
limit switches for temporary commissioning
Servo axis Not used Fill in according to the actual configuration
Positive limit signal Settable positive hard limit pin
NO: no output in the untriggered state, select this item
NC: output in untriggered state, select this item
Soft limit Open Settable negative hard limit pin
NO: no output in the untriggered state, select this item
NC: output in untriggered state, select this item
Soft limit range -10~10mm The range of axis movement after the software returns origin
Axis taq Current axisforlabeling,detailed information notes