Raytools XC3000S Series, Руководство по вводу в эксплуатацию, Страница: 132 / 138

XC3000S Series Laser Cutting
S
y
stem Commissioning Manual
92
Parallel exchange
Parameter Name Default Value Remarks
Pallet changer with bolt No Fill in according to the actual configuration
Bolt unclamped in-pos No Fill in according to the actual configuration,
Settable delay time
Bolt clamped in-pos None Fill in according to the actual configuration
Up-bolt unclamped in-pos logic Not used,
NC
Settable up-bolt unclamped in-pos input pin
Up-bolt unclamped in-pos sensor logic.
If this signal is available, just select it according to
the actual configuration;
If this signal is not available, select NO.
Up-bolt clamped in-pos logic Not used,
NC Settable up-bolt clamped in-pos input pin
Up-bolt clamped in-pos sensor logic.
Low-bolt unclamped in-pos logic Not used,
NC
Settable low-bolt unclamped in-pos input pin
Low-bolt unclamped in-pos sensor logic.
Low-bolt clamped in-pos logic Not used,
NC Settable low -bolt clamped in-pos input pin
Low-bolt clamped in-pos sensor logic.
Up-pallet bolt unclamped Not used Settable up-pallet bolt unclamped output pin
Up-pallet bolt clamped Not used Settable up-pallet bolt clamped output pin
Low--pallet bolt unclamped Not used Settable low-pallet bolt unclamped output pin
Low--pallet bolt clamped Not used Settable low-pallet bolt clamped output pin
Z-axis up-pallet negative
soft limit
0 When the up-pallet is in the cutting area, the
Z-axis moves to this coordinate at the lowest