Raytools XC3000S Series, Руководство по вводу в эксплуатацию, Страница: 117 / 138

XC3000S Series Laser Cutting
S
y
stem Commissioning Manual
92
to return to zero
Return origin speed 1.8 Speed of finding the reference signal when returning to
zero
Back distance 0 Distance from zero return to limit signal setback
Aft back set coordinate 0 Coordinate value of the reference switch in the coordinate
system
Absolute zero offset 0 Use the current point as the zero point; commissioning
without limit switches
You can use it for temporary debugging when
7.6.4 Z-Axis follow parameter
Z-axis follow parameters
Parameter Name Default
Value Remarks
Pulse number 10000 Howmanypulses to send to the servo, the motor turns one revolution
Motor direction Positive The motor rotation direction is CW or CCW; when the shaft moves in
the wrong direction, it can change this option
Pitch 10 The actual distance the shaft moves when the motor turns one
revolution
Speed unit of drive pulse/s Selectable pulse/s, 0.1RPM, RPM
Speed loop
feedforward
coefficient 0.01 Default is fine
Max follow-up offset 30 When the absolute value of the difference between the
commanded position and the actual position is greater than this
value, the software will alarm and shut down.
Homing mode Incremental Incremental: Find the zero signal back to zero and use the zero
signal as a reference point