Raytheon STD 21 GPS, Руководство по эксплуатации

Страница: 74 / 119

Satellite Compass
STD 21 GPS
66
3717/110--850.DOC020002 Edition: Feb. 05, 2007
Procedure to leave “GPS Setup” with a changed configuration.
If a data format change has been made, operate the soft key “Set” and the display “GPS
Setup” is shown again with additional menu options to acknowledge the change or to
discard the setting.
Dim
up
Dim
down
GPS Setup
Serial Port #3
Serial Port #4
PU Mounting
AU Alignment
GPS
Pos.
Select
Set
Sat.
Status
Software Versions
Discard changes
Store settings
and restart system
Figure 55: Display “GPS Setup” after changes have been made in one of the submenus
To store the change, select “Store settings and restart system” with the soft key “Select”
and operate “Set”. The STD 21 GPS will restart and, after the initialization and acquisi-
tion procedure, the display “GPS Pos.” (Basic Display) is shown (see Figure 8).
Procedure to leave “GPS Setup” without a changed configuration.
Select “Exit” without performing a change in the submenu “Serial Port #4”
(see Figure 54), then the display “GPS Setup” (without additional menu) is shown
(see Figure 50) .
or
Select “Discard changes” with the soft key “Select” and operate “Set”, then the
display “GPS Setup” is shown again (see Figure 50).