Raytheon STD 21 GPS, Руководство по эксплуатации

Страница: 73 / 119

Satellite Compass
STD 21 GPS
STD 21 GPS
65
Edition: Feb. 23, 2009
3717/110--850.DOC020002
3.5.3 Submenu “Serial Port #4”
After entering submenu “Serial Port #4”, the following display is shown:
(Note: from “GPS Setup”, press and hold “Set” for 5--10 seconds to enter this submenu)
Dim
up
Dim
down
Serial Port #4
Select
Set
√
Port Disabled
Course Bus
NMEA 0183
Fast NMEA
No header
Header GP
Header HE
Exit
Figure 54: Submenu “Serial Port #4”
“Port Disabled” = No data output at port #4
“Course Bus” = Anschütz specific data format
“NMEA 0183” and “No header” = NMEA Data format, only “Heading true” data
output, update rate 1sec. (see section 4.4)
“NMEA 0183” and “Header GP” = NMEA Data format, “Heading true” data output
with a source information: generated by GPS,
update rate 1sec. (see section 4.4)
“NMEA 0183” and “Header HE” = NMEA Data format,“Heading true” data output
with a source information: generated (simulated)
by a Gyro Compass, update rate 1sec.
(see section 4.4)
“Fast NMEA” and “No header” = NMEA Data format, only “Heading true” data
output, update rate 20 msec.
“Fast NMEA” and “Header GP” = NMEA Data format, “Heading true” data output
with a source information: generated by GPS,
update rate 20 msec.
“Fast NMEA” and “Header HE” = NMEA Data format,“Heading true” data output
with a source information: generated (simulated)
by a Gyro Compass, update rate 20 msec.
See also section 4.4.2.
A selected item is designated with a “
√
” in the rectangle.