Raytheon STD 21 GPS, Руководство по эксплуатации

Страница: 20 / 119

Satellite Compass
STD 21 GPS
12
Edition: Feb. 05, 2007
3717/110--850.DOC020002
2.3 Displays
2.3.1 Display “GPS Pos.” (Basic Display)
This display is shown after finishing the initialization procedure.
This display shows heading in numerical form and position values (latitude and
longitude). The position is for information only.
Dim
up
Dim
down
GPS
068.7
°
HEADING
Select
Menu
GPS
Hdg.
Contrast
Lamp
Test
GPS
Config.
LAT: 054
°
21.164’ N
LON: 010
°
08.220’ E
WSG’ 84
Figure 8: Display “GPS Pos.” (Basic Display)
Soft Key Meaning refer to
section
Select
Menu
Select additional menus to:
-- Check CAN Bus addresses
-- Check software version
-- Set volume
see sections
2.3.8 and 2.3.9
GPS
Config.
Select additional displays to evaluate satellite
information or constellation.
Select setup menu for:
-- The Antenna Unit and Processor Unit
installation positions
-- System Configuration
see sections
2.3.6 and 2.3.7
see
section 3.5
GPS
Hdg.
Select the display “GPS Hdg.”
(Heading is displayed in large numbers)
see
section 2.3.2
Dim up Brightness control / Contrast control see
section 2.2.1
Dim down Brightness control / Contrast control see
section 2.2.1
Lamp
Test
Check the lamp, buzzer and brightness see
section 2.2.2