background image

127.9

°

EBL1

T

Left dial

Right dial

Operator Manual

Raytheon Marine GmbH

Germany

R

NSC 18

RADAR

2

49

3748DOC020102

Edition: 14.JAN.2005

Bearing and cursor

Place the cursor on EBL 1, press the 

Right

 trackball button. 

Find the desired target and press the 

Left

 trackball button.

Bearing / distance and toggle field

 with slider

Depending on the toggle field, the bearing (EBL) or the distance (VRM) can be
edited by moving the slider (see chapter 2.2.4.4).

Bearing / distance and operator panel

This alternative method of operation allows the EBL1/VRM1 function to be
displayed or adjusted quickly. Pressing the toggle switch releases the rotary dials
for the operation.
The 

EBL

 and 

VRM

 status LEDs light up.

The EBL/VRM is always placed at your own position. 
Parallel movement is not possible when using the operator panel.
Adjust the EBL/VRM rotary dials to change the bearing (EBL) or the variable 
range area (VRM).
The variable range area is directly linked to the range rings (RNG) and 
adapted accordingly in the display.

2.3.4.3

Deactivating EBL and VRM

The EBL/VRM displays can be hidden by selecting the toggle field again. 

Position the cursor on the desired toggle field. 
Press the

 Left

 button.

Содержание NSC 18





















































































Отзывы: