Raytheon Beechcraft Bonanza 35 Series, Руководство по ремонту

Страница: 487 / 493

BONANZA 35 SERIES SHOP MANUAL
Page 2
Aug 29/03
B21
Section 8
Raytheon Aircraft Company expressly disclaims any responsibility for malfunctions,
failures, damage or injury caused by use of parts not authorized by the Raytheon Aircraft
Company.
Overhaul and Replacement Schedule
ITEM OVERHAUL OR REPLACE
NOTE
All items not listed are to be overhauled or replaced “on condition”. “On condition” items are to be overhauled or
replaced if inspection reveals a potentially unsafe or unserviceable condition, if they are worn, inoperative,
inaccurate, intermittent and not repairable through normal maintenance. Primarily items that are calender, cycle
or hour limited are included in the following list.
LANDING GEAR
Brake Assembly On condition
Landing Gear Motor 1,000 hours
Landing Gear Actuator P/N 35-810075-7 2,000 hours
Landing Gear Actuator P/N 35-810075-13 4,000 hours
Master Cylinder On condition
Main Gear Assembly On condition (Leaking or collapsed struts that cannot be
corrected by seal replacement will constitute the “On
condition” requirement. Any pitting, corrosion, cracking,
distortion or visible wear noted during the seal
replacement will also constitute the requirement for an
overhaul.)
Nose Gear Assembly On condition (Leaking or collapsed struts that cannot be
corrected by seal replacement will constitute the “On
condition” requirement. Any pitting, corrosion, cracking,
distortion or visible wear noted during the seal
replacement will also constitute the requirement for an
overhaul.)
Parking Brake Valve On condition
Retract Motor Brushes 500 hours or on condition
Shimmy Damper 1,000 hours
Shuttle Valve Assembly On condition
Wheels and Tires On condition
All Hoses Hoses carrying flammable liquids at engine overhaul, or
every 5 years, whichever occurs first since the last
replacement or delivery date of the airplane from the
factory. All other hoses on condition.
Nose Gear Retract Rod Rod-Ends (All) 2,000 hours