Raytheon Beechcraft Bonanza 35 Series, Руководство по ремонту

Страница: 462 / 493

BONANZA 35 SERIES SHOP MANUAL
Page 8
Aug 29/03
B21
Section 7
A. OPERATIONAL INSPECTION (Continued) MECH INSP
21. FUEL TANK SELECTOR - Check for proper placarding, proper operation and feel for
positive detent.
22. ALL LIGHTS - Check for condition, attachment, cracked or broken lenses. Check
switches, knobs and circuit breakers for looseness and operation.
23. STALL WARNING SYSTEM - Check for proper operation and heating of the unit.
24. RADIO OPERATION - Check for proper operation, security of switches and knobs.
25. FLAPS - Check for noisy operation, full travel and proper indication.
26. PITOT HEAT - Check for amperage drawn on ammeter and for proper heating of the
unit.
27. FLIGHT INSTRUMENTS - Check for condition and proper operation.
28. BRAKES - Check for condition and wear, ease of operation and proper release of the
parking brake. Check for unusual brake chatter.
29. EMERGENCY LOCATOR TRANSMITTER - Check for proper operation. Tune radio to
121.5 MHz on VHF or 243 MHz on UHF, then turn ELT switch to ON and monitor for
one signal. Turn ELT switch OFF, then place in ARM position. Ensure that the ELT is
armed when the airplane is returned to service.
30. AIR-CONDITIONER (Evaporative System) - Drain unit to remove dirt and other foreign
particles from the wick box, drain line and overflow line. Remove wick assembly from
box and flush with water. Refer to AIR CONDITIONER (EVAPORATIVE) SERVICING
in Section 3.
31. AIR-CONDITIONER (Refrigerant System) - Operate the air conditioner and verify that
the retractable condenser moves to the ground extended position when turned on and
returns to the retracted position when turned off. Check for proper operation and
unusual noise.
32. OXYGEN SYSTEM - Functionally check the oxygen system for proper operation. Check
the oxygen bottle shutoff valve for proper operation.
33. SWITCHES, CIRCUIT BREAKERS - Check for proper operation.
34. FLIGHT CONTROLS, TRIM CONTROLS AND TRIM INDICATOR - Check freedom of
movement and proper operation through full travel with and without flaps extended.
Check electric trim controls for operation.
B. POWER PLANT
1. NACELLE SKIN - Check for deformation and obvious damage or cracks. Check for
loose or missing rivets.
2. NACELLE STRUCTURE - Check for cracks and deformation. Check for loose or
missing rivets and concealed damage.
3. COWLING - Check for condition, security and adjustment of latches. Open the upper
cowling and clean. Inspect for cracks.
4. COWL FLAPS - Check for travel, deformation and security. Inspect for cracks.
100-HOUR OR ANNUAL INSPECTION (Continued)