Raytheon 133-560 NG011, Руководство оператора и по обслуживанию, Страница: 27 / 63

Repeater
Compass
_________________________________________________________________________________________________________________
Edition: August 2014 2-11 3969.DOC010102
Repeater Compass
133-560
2.7.3 Test mode and actual configuration/status information
With the operations described below the test mode is started and by operating the key
essential configurations or status information can be displayed.
For changing configuration see section 2.8.
RS422 (RS232C) Heading Serial Operation (NMEA or course bus)
Indications Comments, notes
Operate key 1x
Software status (shown example only)
Operate key 2x
Selected interface type:
SCI = Serial controlled interface (as shown)
Do not operate the key too long:
- approx. 3 seconds after test mode
is selected, another mode (-CF-) is
started
Operate key until
-
display indicates ’8.8.8.8.’
- the cards, the key, the luminous
panels, the three-colour LED,
the three-line display and
the digital display will light up with
maximum brightness.
With configuration of the unit as steering
Repeater Compass an audible signal is
emitted (continuous sound) only when
the Repeater Compass is connected
direct to a gyro compass.
(yellow)
(yellow)
(yellow)