Raytheon 133-560 NG011, Руководство оператора и по обслуживанию, Страница: 24 / 63

________________________________________________________________________________________________________________
3969.DOC010102 2-8 Edition: August 2014
Repeater Compass
133-560
2.6 Signals during operation
During normal operation the heading is indicated by the display and the cards.
In addition to the heading value on the digital display the source of the heading
information is shown with a 3-line display at the top right of the front plate.
The heading source light up green (”Gyro”, “Mag” or “Sat”).
Indications Comments, notes
Valid heading from the gyro, magnetic or satellite compass
(green)
-
LED lights up green.
- The three-line display shows the heading source.
No valid heading
(red)
( )
- LED lights up red
- horizontal lines on the digital display
-
after approx. 10s the LED and “Con” are flashing
Please note:
Only if this repeater is configured as “G-AL”
(Heading Serial

HSER) the audible alarm signal is active.
- for buzzer off - press key