Raytheon 133-560 NG011, Руководство оператора и по обслуживанию

Страница: 13 / 63

Repeater
Compass
_________________________________________________________________________________________________________________
Edition: August 2014 1-5 3969.DOC010102
Repeater Compass
133-560
Various functions can be selected via the multiple-function key on the right side of the
front panel:
Please note:
After a function is selected (except “DIMMING”) the normal
mode is displayed after approx. 4 seconds (timeout) when
the key is released.
- 1. Function: DIMMING (see section 2.7.1)
This function is available in the normal operation mode.
It is not specially indicated.
With the key the setting can be made darker, brighter and can
be switched off (except the function key itself).
Please note:
If the Repeater Compass is configured as CAN Bus
Repeater the external central dimming is capable in both
directions.
- 2. Function: TEST (see section 2.7.3)
This function is activated by operating the key (into max. brightness
direction) for approx. 11 seconds until the display shows .
After releasing the key, the test runs on its own.
The dimming of all displays and lighting, the completeness of the
digital display and the function of the analog displays is tested.
The test lasts approx. four seconds.
The buzzer can be tested if the repeater is configured as a G-AL
(Al = indicate alerts (acoustical and optical) if connected via
Course Bus to a Standard 22 Compact, see section 2.7).
After a short release of the multiple-function key and an activation
again the adjusted configurations are displayed (one after another
with each key operation, see section 2.7.3).
8888