-22-
TellPhone 5000
Putting into operation for the first time
•
Switch on TellPhone 5000.
•
Within the first 10 sec. of switching on TellPhone 5000 (recognisable by the
backlighting on the display switching on), press the red and green buttons
simultaneously for at least 1 sec. The signal lamp lights up briefly to signal
that the registration process has been initiated.
•
The control unit is now registered on TellPhone 5000 and is ready for use.
There is no need to repeat registration after changing a battery.
Disposing of used batteries
•
Used batteries should not be thrown in with the household waste.
•
Used batteries should be deposited at an appropriate collection point (e.g. at
your dealer or in a specialist electronics market).
Putting into operation for the first time
Registering the control unit
The first time you put your TellPhone 5000 into operation you will need to
register the radio control unit on TellPhone 5000. To do this, switch on TellPhone
5000 by turning on the ignition and press the red and green buttons on the
control unit simultaneously within the first 10 sec. of switching on TellPhone
5000. This ensures that your TellPhone 5000 only reacts to your control unit.
Selecting the menu language
Next, select your required menu language. A list of all available languages is
displayed.
Selecting the connection type
Please switch your mobile phone on first (if you have not already done so) and
activate the Bluetooth function (“Visibility”) in the mobile phone menu. If
necessary, look in your mobile phone's operating manual to check the exact
procedure.
TellPhone 5000 then searches for mobile phones in its receiver's range. This
process takes approx. 10 sec. If your mobile phone is not found, please refer to
the “Handsfree mode” section for further information. If the name of your
telephone is displayed, select it via the “Accept” button. TellPhone 5000 will
now search for available services and, if possible, sets up a connection to an
appropriate service.
After a few seconds you will be prompted to enter the Bluetooth PIN. On the
telephone, enter the PIN shown on the TellPhone 5000 display.
Handsfree mode (handsfree profile)
Under certain circumstances, pairing with your telephone in handsfree mode
will not work using the method described above. If you are sure that your
telephone supports the Bluetooth handsfree profile, please proceed as follows:
