RayTek GP Series, Руководство по эксплуатации

Страница: 33 / 72

GP Monitor
26
Rev. F 10/2011
GP Series
GP Monitor Display = b 3 Trigger signal high, output normally high
Figure 15: Output Examples
5. Press the button once more and a display similar to the
following figure appears. Use the or buttons to adjust the
deadband.
Figure 16: Deadband Display
6. If you have completed adjusting Setpoint 1 parameters, pressing
the
button will take you to Setpoint 2. When finished with
Setpoint 2, if used, pressing again takes you to the 4-20 mA
output setup indicator display.
To return to the temperature/value display, press the button until
the temperature/value display appears.
Note:
Signal
Signal