www.raytecled.com
3
UK / Europe Tel: +44 (0) 1670 520055
Americas Tel: + 1 613 2709990
2. Installation
Mounting WARRIOR Unit
1. To meet the requirements of certification a
MINIMUM
of 2 fixing points must be used,
the fixing points must be suitable for the conditions of use. Raytec recommend using
2xM8 or 4xM6 Marine Grade A4 Stainless Steel fixings (not supplied as standard unless
with accessory kits)
2. The rear of the unit has 3 blind sets of M8/M6 fixing points, a full range of mounting
accessories are available including a range of pole clamps, ceiling mount brackets,
various wall mount brackets, outreach bracket and chain mount eyelets. Please consult
www.raytecled.com for further details.
The spigot mount version of the product is provided with a pole mount system and 2xM8
A4 SS Grub Screws for mounting onto 32-43mm diameter poles. Once mounted tighten
grub screws to 17Nm.
3. When installing the WARRIOR luminaire vertically, where possible, the cable glands
should be kept to the bottom of the luminaire.
1370 FOR WL168 EMER
761 FOR WL84 STD AND EMER
1251 FOR WL168STD
1635 FOR WL168-1500 STD
174
10
8
400 FOR WL84
700 FOR WL168/WL168-1500
Dimensional Diagrams
