18
2. For Mac OS
®
:
Step 1: Open Skype
TM
, click
“Account
→
Manage API Clients…”
, select
“WirelessUSBPhone”
, then click
“Change”
:
Step 2: Select
“Allow this program to use Skype”
, click
Done
and save the setting.
D. The speaker too quite/loud/Cannot hear the phone rings clearly.
Step 1: Your phone maybe muted, press the volume up key to unmute the phone.
Step 2: The speaker volume on your PC or on the phone maybe set too low, please adjust the
volume on your PC or the phone.
Step 3: If you select a mp3 or wav file as your ringtone, try to change a louder one. (Please
refer to
Troubleshooting B
)
E. No Indictors on the display/Press the power key, but nothing happened.
Step 1: Be sure to press and hold the power key
for 3 seconds, until the display appears.
(Please refer to
6.6 Powering the Phone on and off, Standby and Sleep Mode
)
Step 2: Charge the battery, the battery level should have at least 1 segment showing, if it does
not, recharge your battery. (Please refer to
6.7 Charging the Batteries
)
F. Poor reception or drops calls (bad audio quality).
Step 1: The phone maybe too far from the USB dongle, try to move the phone closer to the
USB dongle or move to an area with a stronger signal to use your phone.
Step 2: There may be strong interference signals nearby, implement the paring of the phone
and USB dongle. (Please refer to
3.5 Pair the Phone and USB Dongle
)
Содержание VH2400R
Страница 6: ...6 Chapter 4 How to use Wireless USB Phone...
