RAYTAC VH2400R, Руководство пользователя

Страница: 5 / 20

5
3.3 Install the batteries
Note: Always use AAA Ni-MH rechargeable batteries only.
Slide the battery cover and insert the three batteries with the correct polarity as indicated.
Replace the battery cover firmly back into place.
Note: The phone will automatically turn on after inserting batteries.
3.4 Insert the USB Dongle into the USB Port
Note: Skype
TM
will automatically detect the phone as new audio
device “USB Headset” . Please click “ OK ” to set the phone as default
audio device of Skype
TM
.
3.5 Pair the Phone and USB Dongle
Note: You only need to pair the phone and USB dongle the first time with any computer you
use the phone with. Refer to the following instructions to pair the phone and USB dongle:
z
Press the square connect button on the USB dongle until the light turns on.
z
Hold the phone 10 cm from the dongle until the light on the dongle blinks.
z
Please wait for 5 seconds and check that the indictor is shown on the handset
display.
Note: Please do not use other VoIP USB device after connecting the USB dongle on your
computer. Please do not remove the dongle from the USB port while a call is in progress.