DHG0000004 RB Universal SR10000™ Installation Manual
1
Installing the
Indoor Unit (IDU)
and Satellite
Receiver
This section offers a general explanation of
how to properly install the IDU and satellite
receiver to the inside of the vehicle’s body.
6.1 Placement of IDU and Receiver
1. The RF cable is routed from the antenna to
the IDU inside the vehicle. Decide where
to locate the IDU and satellite receiver,
and make sure that both units are placed in
a dry and protected area. Typically, they
are placed under a seat for protection. The
IDU and satellite receiver should be placed
away from any heat source and in an area
with proper ventilation. Ensure that there
is at least 5cm of space around both units
for ventilation and connection of cables.
NOTE
Ensure that the IDU and
receiver have at least 5cm of
space around both units for proper
ventilation. Do not stack the units on
top of each other.
6.2 Installing the IDU
1. Use the supplied self tapping screws
to install the IDU to the vehicle’s body
(Figure -1).
6 Installing the IDU and Receiver
the improper drilling through the body of
the vehicle. Only a trained automotive
technician should perform this installation.
TOOLS & INSTALLATION
RaySat is not responsible for
damage caused to vehicles by
Figure -1 Mounting the IDU.
