33
MODE 8
(With Default Settings Shown)
VIEW MENU
The View menu items display current operating tem-
peratures and system status information. Use the
Item button (see Fig. 5) to view items in this menu.
Item Field
Range
Description
-20 to 266°F
(-29 to 130°C)
BOILER OUTLET
Current boiler outlet water temperature as measured
by the boiler outlet sensor.
-20 to 266°F
(-29 to 130°C)
BOILER INLET
Current boiler inlet water temperature as measured by
the boiler inlet sensor.
Note:
This item is only available when a boiler inlet
sensor is installed.
0 to 252°F
(0 to 140°C)
BOILER DELTA T
Current temperature difference between the boiler outlet
sensor and the boiler inlet sensor.
Note:
This item is only available when a boiler inlet
sensor is installed.
0 to 999
BOILER ON HOURS
The total number of running hours of the boiler since
this item was last cleared. Clear the numbers of hours
while viewing this item.
by pressing and holding the and buttons together
Table S: View Menu, Mode 8
ADJUST MENU
The Adjust menu items are the programmable settings
used to operate the system. Press and hold all three
buttons for one second to enter the Adjust menu, then
select the desired item using the Item button. Finally,
Item Field
Range
Description
Setting
1 to 8
MODE
Select the operating mode for the
control.
OFF, 0:20 to
9:55 min, On
PUMP DELAY
Select the system pump purge time after
shutting off the burner.
°F or °C
TEMPERATURE UNITS
Select to display temperature in degrees
Fahrenheit or in degrees Celsius.
Table T: Adjust Menu, Mode 8
use the
▲
or
▼
button to make the adjustment (see
Fig. 6).
MODE 8
(With Default Settings Shown)
