3. User manual
28 |
EN
3.1.4 Start device and enter program sequence
In order to be able to use the therapy program for the pain relief in connection with cervical spine syndrome
with the Rayocomp PS 10, the RAH module M10 must be enabled in the device.
When the Rayocomp PS 10 is switched on, the display of the device shows the menu item “Direct”:
Now press the key:
The Rayocomp PS 10 changes over to the menu
item “F1-BaPS“ and displays:
Once again, press the key:
By pressing the Mode key again, the Rayocomp PS
10 will switch over to the RAH module. However,
this will only occur if the module 10 have effectively
been activated.
