RAYN Installation Guide
Lamp Head and LED Driver
Lyda Lamp Head
•
Do not install the lamp head against walls or ceilings. Suspend the lamp head in
free-air to allow for proper convection cooling.
•
The Lyda lamp head is suitable for damp locations. Prevent direct water flow on
the lamp head. Do not install any Lyda system component underneath the
irrigation system.
Note:
For use with the approved power source only.
The light source in this lamp head is not user-replaceable and must be
replaced only by a qualified technician. Contact your RAYN provider for
assistance.
CAUTION:
Do not make or break connection under load.
ATTENTION :
Ne pas brancher ou débrancher sous charge.
Lamp Head and LED Driver
Page 5 of 8
RAYN
