Rayming RMLASER, Руководство пользователя

Страница: 34 / 42

Draw out the laser tube form the end of the tube （出c faraway of the reflecting lens I)
carefully and then put in on the safe place.
Attention : The useless laser tube is fragile and need dealing carefu lly;
Please according to the rule of how to recycle the glasswork of local law to transact it.
And the manufacturer don
’
t take any responsibility for the u seless glass tube.
After uninstall, and se仕ing the new laser tube in term of the following p r ocess: Fix the
laser tube on the frame in the right direction which means the light outlet toward s the
first reflecting lens
Fix the fasten button.
Connect with the water inlet and outlet.
Connect the anode and cathode of the laser tube. Since there is high voltage with the
anode
乡
it is better to deal with insulation
Tum on the water pu mp , and cycle the water for one minute. A
司j
ust the location of the
laser tube to squee ze out the bubb les
Close the door.
Starting test.
6.2.3 Cleanness of the focus lens
The lens will be polluted easily by the dirt and it should be cleaned after use for a
period of time . focus lens clean
Loosen the screw on the left and tum down the lower part. Twist off the gas outlet,
then tum down the nut with a flat tool. You will take out the focus lens.
2) Use alcohol to clean the lens until there is not any dirty. 3)Use the alcohol to tidy
- 34-