Rayming RMLASER, Руководство пользователя

Страница: 11 / 42

REMOVE 3PCS THE CABLE TIES FROM X Y AXIS BEL
check if there is any damage when transported
Attention: if you find
细
1y damage on the machine while installation process,
please inform our company or authorized agency.
4 .1 . 3 Location of the machine
The machine should be put near the windows Fix
four
wheels of the machme
4.1.5 Connection with也c general power supply .
Insert power line into the INPUT of the back of the machine
4.1.6 Installation of the accessory
1) Connect water pump with m achine.
Put the pump into the bucket, then insert the power wire into the main
engine. Connect the water outlet w i th the water inlet of the machine and
insert the water outlet of the machine into the rubber tube, at last put the
rubber tube into the bucket.
Installation (ma t chin g) of the chiller
Attention::
Pleas e do not plug into 220v socket when the chiller is llOv, to avoid
burning the chiller.
Take down the cover of water inlet on the top of the chiller.
Pour purity water into the water tank until it is full.