Raymarine ST60+ SPEED INSTRUMENT, Руководство пользователя

Страница: 40 / 60

28 ST60+ Depth Instrument Owner’s Handbook
Depth offset
Depths are measured from the transducer to the sea bed. However, you can use
the depth offset screen to apply offsets to this distance, so that the displayed
depth reading represents either the depth from the keel or the depth from the
water line (
W/L ). In order to do this, you need to know the vertical separation
between the transducer position and:
• The bottom of the keel. This requires a negative offset.
• The water line. This requires a positive offset.
Hold down
for approximately 2 seconds
Entry
screen
Depth
units
Depth
offset
Shallow alarm
lock
Pop-up
pilot
User calibration
depth
either
At each screen use
to set the required values
or offset reset
depth
depth
depth
depth alarm
+
depth
To leave User calibration,
hold down
for approximately 2 seconds
depth alarm
+
D8165-1
81262_2.book Page 28 Friday, November 11, 2005 11:11 AM