Raymarine ST4000 Plus, Руководство пользователя

Страница: 81 / 119

68 ST4000 Plus Wheel & Tiller Autopilots Owner’s Handbook
Basic installation
After establishing the control dimensions, the ST4000 Plus actuator
can usually be mounted directly onto the cockpit seat.
Tiller pin installation (Part No. D001)
1. Drill 6†mm (1/4†in) hole x 25†mm (1†in) deep at point marked.
2. Using a two part epoxy (e.g. Araldite), epoxy the tiller pin in place.
3. Position the shoulder of the pin 12.5†mm (1/2†in) above the tiller
surface.