Raymarine ST4000 Plus, Руководство пользователя

Страница: 42 / 119

Chapter 3: Advanced Operation
29
Alternatively, to cancel the alarm without accepting the waypoint
advance, press
standby
to return to hand steering, or
auto
to return to
Auto mode.
Note:
The waypoint advance will only operate on pilots receiving
valid bearing to waypoint and waypoint number information.
Low battery
LOW BATT
The Low Battery alarm sounds when the supply voltage drops below
10†V (±0.5†V).
Press
standby
to clear the alarm and return to hand steering.
Start the engine to recharge the battery.
Watch alarm
WATCH
The Watch alarm is activated in Watch mode when the timer reaches 4
minutes. It is not available from Standby mode.
If you wish to set the Watch mode, the
WATCH
screen must be
configured as one of the Data Pages for display, as described in section
5.1 .
To set and control the Watch alarm:
1. Select Auto, Track or Vane mode.
2. Press the
disp
key until the
WATCH
Data Page is displayed.
ï The watch timer starts counting.
ï When the timer reaches 3 minutes, the text on the display starts
flashing to indicate the last minute of Watch alarm.
ï When the timer reaches 4 minutes, the audible Watch alarm is
activated.
3. Press
auto
at any time to silence the alarm and reset the timer to
4 minutes. (Pressing any other key resets the timer and performs
the keyís normal function.)
4. To clear Watch mode, press
disp
to display a different page, or
press
standby
.
Note: You cannot engage Auto mode from Watch mode ñ pressing
auto
only resets the Watch timer.