Raymarine SmartPilot X-5R, Установка и настройка диска

Страница: 13 / 76

Chapter 1: Installation and system overviews 5
Tools and equipment NOT supplied
You will need to supply the following equipment and tools:
Tools:
• Flat bladed screwdriver
• Power drill (cordless recommended).
• Bearing puller (optional - to remove the steering wheel).
•
5
/
32
in (4 mm) drill.
• Suitable wrenches/spanners.
Cables / equipment
• Power cable and fuse/breaker. See page 20 .
• Additional data cables (e.g. for connection of GPS or chartplotter).
• Grounding braid. See page 25 .
1.4 Create a schematic diagram
As part of the preparation for installing your SPX-5R Drive system, we recommend
that you create a schematic diagram representing the system you want to install. This
will help ensure that you install a safe optimum system, and so is particularly
important if you intend connecting your autopilot to other electronic equipment.
The schematic diagram should include:
•
Location of all components. See page v and page 7 for EMC guidelines that may
affect the location of specific components.
• Connectors, cable types, routes and lengths.
When you have completed the schematic diagram, you are ready to begin installing
the SPX-5 Drive system.