Raymarine SmartPilot X-5R, Установка и настройка диска

Страница: 49 / 76

Chapter 3: Commissioning & Setup 41
AutoLearn procedure
1. If you are not already in Seatrial calibration:
i. From Standby mode, hold down
standby
for 2 seconds, then press
disp
twice
to see the SEATRIAL CAL screen.
ii. Press
auto
to enter Seatrial calibration.
iii. Press
disp
four times to see the AUTOLEARN screen.
2. In Seatrial calibration, press
disp
as necessary, until the AUTOLEARN screen is
displayed.
At least 0.2
5 nm (500
m) of clea
r sea space
At least 0.0
4 nm (100
m)
of clear sea spac
e
D11543-1
Typical non-planing vessel at 6 kts
Wind
At least 1 n
m (2000 m) of clea
r sea space
At least 0.2
5 nm
(500 m)
of clear sea space
D11544-1
Typical planing vessel at 20 kts
Wind