Raymarine SmartPilot Verado, Руководство по установке и пусконаладке

Страница: 58 / 72

48 SmartPilot Verado Installation and Commissioning Guide
System reset
WARNING: Do NOT use this feature unless advised to do so by a
Raymarine dealer. If you complete a reset you will lose
ALL SmartPilot calibration settings. You will then need
to repeat the SmartPilot commissioning process.
Selecting System reset will reset all of the calibration values:
• all of the settings in User Calibration, Seatrial Calibration and Dealer Calibration will
return to the factory default values
• the settings in Display Calibration will not change, as these are stored in each individual
controller
To reset the system:
1. Select the System reset (RESET) screen in Dealer Calibration.
2. Press the
+1 key.
3. The screen will then show an ARE YOU SURE message:
• press the +1 key again to select ‘YES’ and reset the SmartPilot
• alternatively, press the
disp
key to cancel
4. You will then see the CAL LOCK screen:
• press
standby
for 2 seconds to save the new default settings, then turn the SmartPi-
lot computer power off and back on