Raymarine RSW-Wired, Руководство по установке

Страница: 48 / 74

14.1 Troubleshooting
The troubleshooting section provides possible causes and the corrective
action required for common problems that are associated with the installation
and operation of your product.
Before packing and shipping, all Raymarine® products are subjected to
comprehensive testing and quality assurance programs. If you do experience
problems with your product, this section will help you to diagnose and correct
problems to restore normal operation.
If after referring to this section you are still having problems with your
product, please refer to the
Technical support section of this manual for
useful links and Raymarine® Product Support contact details.
14.2 Wind data troubleshooting
Note:
Where solutions are provided in numbered steps, follow the steps in order.
Data appears as dashes on display
Possible causes Possible solutions
Wind data is set to [True] wind and
there is no Speed Through Water
(STW) data available.
1. Set wind data to [Apparent] and
check for wind data.
2. If wind data appears, and you
require True wind instead, check
the source of STW data.
Wind transducer connection
problem.
1. Check cabling to ensure it is
free from damage.
2. Check the cable junction box
(usually located at the bottom
of the mast) for damage and
corrosion, and ensure that
connections are clean and
secure. Repair and replace as
necessary.
3. Check connections to display
or converter for damage and
corrosion, and ensure that
connections are clean and
secure. Repair and replace as
necessary.
4. Disconnect the wind vane
arm and check arm and base
connectors for damage and
corrosion. Ensure that they are
clean and secure, and repair
and replace as necessary.
Data appears to be incorrect
Possible causes Possible solutions
Wind transducer has not been
calibrated, or has lost its calibration
settings. 1. Re-calibrate the wind
transducer. Refer to the
operations instructions supplied
with your display for calibration
procedures.
48