Raymarine RC400, Руководство пользователя

Страница: 118 / 136

108 RC400 GPS Chartplotter
To minimize these effects and to give you the best possible performance
from your Raymarine equipment, guidelines are given in the installation
instructions that enable you to ensure minimum interaction between
different items of equipment, that is, to ensure optimum Electromagnetic
Compatibility (EMC).
Always report any EMC-related problem to your nearest Raymarine
dealer. We use such information to improve our quality standards.
In some installations, it may not be possible to prevent the equipment
from being affected by external influences. In general this will not
damage the equipment but it can lead to spurious resetting action, or
momentarily may result in faulty operation.
6.2 Resetting the System
Three types of reset are available for the Chartplotter:
• Power-On Reset: When you turn the display unit off, then on again,
the screen reverts to the chart display with all windows cleared.
• Hardware Reset: This procedure enacts a power-on reset if the unit
has entered a lock-up condition.
To perform a hardware reset, press and hold the
POWER
key for 9
seconds.
• Factory Reset: This resets all values back to their original factory
settings. The factory default settings are listed in Chapter 4 .
Note: Take care–factory reset clears all Waypoint and Route data-
bases.
To perform a factory reset:
1. Power off the unit.
2. Press and hold
CLEAR
while powering up until <Erase backup
procedure> is displayed.
3. Either press
CLEAR
to abort Factory Reset and resume normal
Power-Up or press
ENTER
to continue Factory Reset.
4. Press
ENTER
again; the unit restarts as for a first time Power Up
with all values reset to their original factory settings.