Raymarine RAY63, Инструкция по установке и эксплуатации

Страница: 63 / 208

1. Orientate the bottom-right side of the bezel under the bottom-right side of the unit, ensuring that
the clips along the bottom edge of the bezel latch into position.
2. Ensure the bezel is correctly aligned with the unit, as shown.
3. Apply firm but even pressure to the bezel along the:
i. Outer edges - work from the sides upwards and then along the top edge, to ensure that it
clips securely into position.
ii. Inner edges - ensure that the bezel sits flat.
4. Check that all control buttons are free to operate.
Fistmic mounting
The Fistmic can be mounted by following the steps below. Whilst only the Fistmic is pictured, you can
also mount the Handset using the same Hook plate (mounting clip).
Before mounting the unit, ensure that you have:
• Selected a suitable location, ensuring there is nothing behind the mounting surface that may
be damaged when drilling.
• Identified the cable connections and route that the cables will take.
Installation 63