Raymarine RAY63, Инструкция по установке и эксплуатации

Страница: 111 / 208

Example
9. The ATIS ID is displayed onscreen, check that it is correct, then:
i. Select Yes – Save , or
ii. if the number entered is not correct select No – Retry .
Caution: MMSI and ATIS ID entry
You can only enter the MMSI number and ATIS ID once!
If you store an incorrect MMSI number or ATIS ID in your product, it will have to be
reset by an authorized
Raymarine ® dealer.
Enabling and disabling ATIS mode
ATIS is a European system used on some inland waterways. A unique ATIS ID must be entered
before ATIS mode can be enabled.
With ATIS mode enabled the radio’s region will be fixed to the INT (international) frequency band and
the following functions are disabled:
• DSC functions
• Watch Mode
• Scan Mode
• High/low power is restricted on certain channels
From the Main menu.
1. Select
Set-up .
2. Select
ATIS set-up .
3. Select ATIS .
If no ATIS ID has been set then you will be requested to enter one before ATIS mode is enabled.
4. If an ATIS ID has already been set then select On to enable ATIS mode or Off to disable ATIS
mode.
Getting started
111