Raymarine RAY63, Инструкция по установке и эксплуатации

Страница: 105 / 208

Any adjustments to the shared brightness level will be applied to all products assigned to the same
group.
LightHouse™ / LightHouse™ 2 MFD Instrument display / Pilot controller
VHF DSC Radio LightHouse™ 3 V3.4 or greater
Multiple brightness groups can be configured. For example, these groups could be used to reflect
the physical location of products on your vessel e.g.: helm and flybridge.
Shared brightness requires:
• all products to be compatible with the shared brightness function (see list of compatible products
above).
• the Shared brightness setting set to On for all products in the brightness group.
• products to be assigned to network groups.
• all the products in each group to be synchronized.
Enabling Shared Brightness
From the Display Set-up menu: ( Menu > Set-up > Display Set-up ).
1. Select Shared Brightness .
2. Select Shared Brightness again to enable Shared Brightness.
If Shared Brightness is already enabled then selecting this menu item will disable Shared
Brightness.
3. Select Group .
4. Select the group that you want to assign the radio to.
Adjusting the Brightness setting will now change the brightness of all products assigned to that group.
Getting started
105