Raymarine Ray215e, Руководство пользователя

Страница: 25 / 132

3-2 Operation with Minimum Function Handset
Note: The RAY215E is designed to have the base station as the priority
unit. You should install the base station and Minimum Function Handset
in the radio operation room or the location from which the ship is normally
navigated. If an optional second station Full Function Handset is also
installed, that handset is the one that should be installed in the remote
location.
3.3 Handset Connections
The Minimum Function Handset can be connected to the port on the front
of the base station (Figure 3-2) or mounted near the base station using the
optional Handset Relocation Kit (part number E46026), which is available
from your authorized Raymarine dealer/distributor. The Relocation Kit
must be connected to the HANDSET/RELOCATION KIT port on the
rear of the base station (Figure 3-1).
If both a Minimum Function Handset and Second Station Full Function
Handset are to be used, the Minimum Function Handset must be connected
to the front port with the Full Function Handset connected to the
HANDSET/RELOCATION KIT port on the rear. In this case, the Handset
Relocation Kit could not be used with the Minimum Function Handset.
Once installed, the two stations can communicate with one another using
the Intercom function described in Section 4.6.14.
Figure 3-1 Rear Connections