Raymarine Ray215e, Руководство пользователя

Страница: 24 / 132

3-1 Operation with Minimum Function Handset
Section 3 Operation with
Minimum Function Handset
3.1 Introduction
The RAY215E can be operated with the standard Minimum Function
Handset, or an optional Full Function Handset that enables additional
features, or both handsets to enable intercom capabilities. This section
describes using the RAY215E with the Minimum Function Handset. See
Section 4 for a full discussion of operation using the Full Function Handset.
3.1.1 DSC and NMEA Operation
The Full Function Handset enables Class “D” DSC operations and NMEA
(GPS) position data transmissions in the RAY215E. DSC functions
include: Individual, Group, All Ships, and Distress calls.
To have DSC
and NMEA (GPS) position functionality available with a Minimum
Function Handset, you must also have installed a Second Station Full
Function Handset.
3.2 Minimum / Full Function Handset Priority
When both a Minimum Function Handset and Full Function Handset are
in use, only one can have priority to make a call. When the Full Function
Handset is out of its cradle, it has priority over the Minimum Function
Handset and the REMOTE indicator illuminates on the LCD of the base
station. When the Full Function Handset is in the cradle, the Minimum
Function Handset has priority and the REMOTE indicator extinguishes.
Overriding the Full Function Handset
In an emergency, the base station can override the Full Function Handset
to make a call even though the handset has priority (is off the cradle). To
override the handset, press and hold the DSC/PRI key on the base station.
The REMOTE indicator flashes and the base station regains priority
control. Make your call as usual using the Minimum Function Handset.
On the Full Function Handset, OVERRIDE appears on the dot matrix
display. In this mode, all keys are disabled on the handset except for
DISTRESS. The base station retains control until the DSC/PRI key is
again pressed and held.