Raymarine LIGHTHOUSE 3, Инструкции по продвинутой эксплуатации

Страница: 183 / 450

Creating a Creeping line / Parallel line search pattern
To create a Creeping line / Parallel line search pattern follow the steps below:
1. Set Commence Search Point (CSP)
i. Manually input the CSP coordinates.
ii. Alternatively, set the CSP as your vessel’s current location by pressing the (1) CSP Shortcut
button.
2. Set Search Speed, and Track Spacing
i. Select and edit each variable.
3. Define Search Rectangle (Define by axes)
i. Define the rectangle’s dimensions by using the Major axis and Minor axis boxes.
ii. Set the Creep / Parallel direction manually or set it as your Vessel’s heading by using the
(2) Shortcut button.
iii. Set the 1st turn direction by selecting Port or Starboard .
Variable Maximum Value
Track spacing / Radius 5 nm / 5 sm / 5 Km
Search Speed
40 Kts / 46 Mph / 74 Kph
Major / Minor Axis 20 nm / 23 sm / 37 Km
1. CSP Shortcut
2. Creep / Parallel Direction Shortcut
4. Define Search Rectangle (Define by corner points)
Chart app
183