Raymarine HSB Chartplotter, Руководство пользователя

Страница: 94 / 154

Chapter 4: Further Chart Operations 77
4.5 Cursor Echo
In a combined radar/chart display, or in a system with a radar display
connected via Seatalk, you can set the display to enable cursor echo.
Cursor echo (accessed from System Set Up, described in Chapter 5)
enables you to display a radar cursor on the chart picture, or a chart
cursor on the radar picture (you cannot display a remote chart cursor in a
chart window).
The following options are provided:
• Local cursor: echoes the cursor position between chart and radar
windows on a combined display.
• Remote Cursor (SeaTalk): displays the cursor from a radar display
connected via SeaTalk.
When the appropriate option is switched on, the display shows its own
cursor, plus the cursor of the other display with appropriate cursor text
(RDR or CHT) to indicate its origin. This means that you could move the
cursor over a target on the radar display, and check the identity of the
target by looking at the radar cursor position on the chart plotter.
4.6 GPS Setup
GPS set up page provides you with information and the status of the
tracked navigation satellites. It also provides soft keys to RESTART your
SeaTalk GPS which instructs the GPS to re-acquire the satellite fix, and
to SET UP a SeaTalk Differential GPS, by manually retuning it to a
different differential beacon.
To select GPS Set Up , press MENU, then press the GPS SETUP... soft
key.
The Navigation Status pop-up window, shown on the following page, is
displayed. This window provides, for each tracked satellite, the satellite
number, its signal strength, azimuth angle and elevation angle from your
vessel.
➤
To reacquire the satellite fix, press RESTART GPS.
The GPS restarts; it can take several minutes for the GPS to acquire the
satellite fixes.
GPS
SETUP!
RESTART
GPS
Cursor Echo
&
GPS Setup