Raymarine H6, Руководство по установке системы

Страница: 64 / 124

58 Raymarine H6 - System Installation Manual
Troubleshooting
As with all powerful systems, sometimes everything does not go as it should with H6.
This section will help you to spot and solve some of the problems.
H6 software
Problem Possible solution
Route not being followed, even though Follow Route
softkey is set to On Check that the autopilot is in track following mode.
Expanded data box is not shown on screen Possibly hidden behind another window - reselect the display
mode. The data box will be returned to its original position.
In a split chart/radar window - Range in/out does not
work Click the edge of the section you want to change range in to make
it the active application. Range controls will now work.
Radar overlay is not clear on the chart Change the overlay color in the Layers folder of Set-up. Many
users find a purple color works well in bright sunlight.
Navtex does not operate This is 3rd party software that must be registered prior to use.
Check that the registration screen does not appear when H6 is
started. If it does you will need a license key to register the
software.
On-line does not work You will need to have a modem connection outside of H6 with the
appropriate Windows drivers.
On-line - an added site from an authorized site is not
displayed correctly in the site list. The URL is too long to be displayed. Rename the site with a
suitable name, the URL will remain unchanged.
Display units
Problem Possible solution
You have pressed the power button, but the display
does not function 1. Make sure that the power supply cable is sound and that all
connections are tight and free from corrosion.
2. Check the system fuse.
The display shows the message ‘CHECK INPUT’ Check that H6 is powered and that the cables are correctly
connected.
The display is very dim Adjust the display brightness. If this has no effect then the display
has overheated; when the display cools, brightness will return.
The display switches off unexpectedly The display powers off completely in no input signal is received or
30 seconds. Reapply power to the display by switching it on using
the power button.