Raymarine DSM250, Руководство пользователя

Страница: 110 / 122

7-6 DSM250 Digital Sounder Module
Status LED
The LED on the connector panel provides valuable information
on the status of your DSM250. The LED blinks green while the
module is operating normally. If the unit detects a problem, the
LED blinks amber to indicate a warning or red for an error. The
number of times the LED blinks is a code representing the nature
of the problem. For multiple warnings/errors, the codes are given
in sequence with a 1.5 second pause between strings.
The following table shows the various LED status codes and their
meanings.
1
After 30 seconds of no
hsb 2
activity, the DSM250 enters Standby mode:
No sonar pings are emitted and no warnings are output on the LED.
Instead, the LED blinks green once every 10 seconds.
Table 7-3: Status LED Indications
Color
No of
blinks Meaning
Cleared
every 10 min
W Amber 1 Transducer Sense Failure
A 2
hsb 2
not detected
1
R 3 High Temperature Warning x
N 4 Reserved
I 5 Reserved
N 6 Reserved
G 7 Reserved
S 8 Watchdog Timeout Reboot x
Red 1 Unknown Error x
E 2 Battery Voltage Error x
R 3 High Temperature Error x
R 4 Flash Memory Failure
O 5 Reserved
R 6 Reserved
S 7 Reserved
8 Hardware Monitor Failure