LifeTag Installation & Commissioning Guide
11
Fitting Alarm buzzer
Figure 15 - Fitting buzzer
Connecting system
Important:
When connecting any part of the system, refer to the appropriate diagrams under
Connecting Base Station (above) to ensure you connect correctly
When you have secured the Base Station and Alarm buzzer, connect the Base Station:
• Either to SeaTalk, or to a separate 12 V power supply.
• To the Alarm buzzer.
If you want to use the switched 12 V output from the Base Station, connect as described in
Figure 9
.
Figure 16 - Summary of system connections
D8982-3
1.
3.
5.
4.
Secure bracket to buzzer
Drill two
1/8
inch (3.5 mm)
pilot holes.
Secure the alarm buzzer with the
No. 8 screws provided.
Locating
Securing
2.
Mark holes for fixing
screws.
Countersink the pilot holes
to prevent damage to the
mounting surface.
D8981-3
Alarm buzzer
(see
Figure 8
)
Base Station
(see
Figure 5
)
Connect to SeaTalk
bus (see
Figure 6
)
Connect to 12 V dc power
source (see
Figure 7
)
or
Optional 12 V output
during alarm condition
(see
Figure 9
)
Either
5 A Fuse
Switch
87064_3.book Page 11 Friday, July 28, 2006 9:32 AM