Raymarine A series, Инструкция по установке и эксплуатации

Страница: 18 / 464

Type Example Convention
With the Numeric adjust control displayed you can also select
on the
keypad icon or press and hold the Ok button to open
a numeric keypad to enter a new value for the setting.
Slider bar
controls The term “ adjust ” is used in procedures involving slider bar
controls to refer to the action of changing the associated
numeric value using touch or physical buttons:
• Touch — Press your finger on the up or down arrow to
increase or decrease the numeric value.
• Physical buttons — Use the Rotary control to increase
or decrease the numeric value.
Waypoint (MOB) button / icon
Depending on the multifunction display variant
there will be either a Waypoint (MOB) button or an
on-screen icon.
WPT
button • c Series
• e Series
• RMK-9 keypad
WPT
icons • a Series
• gS Series
Throughout this manual the term: Select WPT , refers
to pressing the physical WPT button or pressing the
on-screen WPT icon.
Touch and non-touch operations
This handbook applies to both touch and non-touch
operations.
This handbook uses icons to identify whether a
particular task is specifically a touch or a non-touch
operation. Where a task does not have a touch or
non-touch icon then the task can be performed using
either.
Touch (Touchscreen operation) —
Touch operations apply to multifunction
displays which have a touchscreen.
Non-touch (physical button operation)
— Non-touch operations apply to
multifunction displays with physical
buttons or multifunction displays that
have a remote keypad connected and
paired to it.
18 a Series / c Series / e Series