20
Enable / Disable Status Indicator LEDs Mode (LHS LED: Solid AMBER)
Enable LEDs:
RHS LED Solid GREEN
Disable LEDS:
RHS LED Solid RED
Note: – If no buttons are pressed within 2 minutes the Illuminator times out
and returns to the previous mode it was in – either operating or
programming mode.
Illuminator Configuration Modes
in Depth (accessed by LHS
BUTTON)
Enter the Illuminator Configuration Mode by a long 4 second press of LHS
button to turn LHS LED Flashing RED. Pressing the LHS button once again
momentarily will turn the LHS LED Flashing GREEN and pressing a third
time momentarily will turn the LHS LED Flashing AMBER. Each of these
colours indicates which setting mode you are in.
A further momentary press of LHS Button will exit from the mode entry,
both LEDs will go blank for 1 second and then return to the standard
indication of either operating mode or programming mode (depending
on which mode the illuminator was in previously before selecting manual
controls)
Within the ‘Illuminator Configuration Mode’ the LHS LED displays 3
different FLASHING colours to signify 3 different sub modes –:
1)Illuminator Rest – FLASH RED 2) Remote Enable/Disable – FLASH
GREEN 3) Manual Buttons Enable/Disable – FLASH AMBER
www.ray
led
.com
Ray
LED
Tel : +
33
(0)
4 58 00 15 74
