4
Installation Guide – Short Guide :
STEP 1: Safety Information (Pg. 2)
STEP 2: Physical Installation (Pg. 5)
Adjust interchangeable lens if required.
Fix to wall, pole or camera unit using U bracket provided or other Ray
LED
bracketry.
IMPORTANT:
Ensure illuminator is rated to provide required viewing distances and select
correct angle
Ensure illuminator is orientated in the correct direction
STEP 3: Wiring (Pg. 6)
For PoE, use standard CAT 5 or better. For all 8 sized products, check the PoE
detection resistance of the illuminator is compatible with your PoE
equipment (24.9KΩ is factory default).
Premium Variants : For low voltage (non-PoE) apply 24V DC to red and
black cores of auxiliary cable. Connect external inputs and external output
wires as required.
IMPORTANT:
Ensure PoE equipment or 24V PSU are suitably rated
For 8 sized products check PoE detection resistance is set correctly
Ensure Cat 5 cable and auxiliary cable are correctly terminated and
waterproofed after installation
If not using auxiliary cable, it must still be suitably terminated and
waterproofed
Step 4 : Interchangeable Lenses: Changing the Angle (Pg. 8)
Step 5 : Configuration - Programming and Settings (Pg. 9)
Step 6 : Security (Optional PIN protection) (Pg. 9)
www.ray
led
.com
Ray
LED
Tel : +
33
(0)
4 58 00 15 74
