Rayjet R500, Руководство по эксплуатации

Страница: 26 / 81

•
Before approaching the system again, wait for at least 30 min until the reaction has abated.
•
Wear proper protective clothing (respiratory protection, protective goggles, protective suit, rubber or
plastic gloves).
•
Provide ventilation.
•
When approaching the system again, pay attention to odors.
•
Remove all lens fragments.
•
Avoid raising or dispersing dust.
Disposal
The ZnSe dust and the lens are to be collected drily and disposed of with fragments, broom,
shovel and protective clothing into hermetically sealable containers or plastics bags as
hazardous waste.
Do not dispose of optical components as domestic waste, and do not let them enter the
sewer or water bodies.
Dispose of according to regulations and laws valid in the users' country.
2.9 In case of emergency
What to do in the event of malfunctions
•
In unusual operating conditions, open the lid to stop the machining process press the emergency stop
button and switch off the machine.
•
If necessary, disconnect the machine from the main power supply.
•
Inform the laser protection officer and your supervisor.
•
Repair work must only be carried out by Trotec Laser GmbH service technicians.
•
In the event of a fire: Fight the fire with a CO
2
fire extinguisher as far as is possible without risk.
Notice
After a deletion, Trotec Technical Support must be involved before the system is put back into
operation.
What to do in the event of an accident, first aid
•
If eye damage occurs due to laser radiation, the casualty must present to an ophthalmologist
immediately.
•
First aiders must protect themselves.
•
Disconnect the device from the power supply and secure it against restarting
– Remove the key switch.
– Unplug the power cable.
•
Rescue the injured person from the danger area and provide first aid.
•
Call an emergency doctor!
ENGLISH
ENGLISH
26 / 81