All control lines of the laser should be connected in a non-
powered state. Installing the control lines with power may
damage the laser.
The placement of the laser output cable must be as natural
as possible, and it is forbidden to twist the output cable.
If the coil diameter of the output cable is too small, the
laser will be damaged.
During the installation and disassembly process, please
handle the laser output head gently, and do not subject it
to vibration or impact.
Before assembling the output head, ensure that the optical
lens and the welding head cavity are clean and free from
pollution.
Please keep the protective cap of the output head properly
to prevent it from being contaminated; otherwise, it will
cause indirect pollution to the output head when the
protective cap is closed.
3.
Using the Product
3.1 Front Panel
3.1.1 Laser front panel:
