Overall dimensions: depth × width × height 340 × 260 × 130mm (including the rear panel fan,
excluding the output cable bending size).
2.7.2
Laser shape and installation dimensions
2.7.3
Installation considerations
1) Place the laser horizontally in a well-ventilated position and fix it;
2) Before powering on the laser, please check whether the DC power supply of the laser is at
the required voltage;
3) Correctly connect the power line and control signal line of the laser in the uncharged state;
4) Please check the laser output head and make necessary cleaning according to the
specifications, and then install it in the equipment;
5) Do not step on, squeeze or excessively bend the metal armored protective tube during the
installation of the jumper to avoid damage to the optical fiber;
6) Ensure that the surrounding environment is clean during the installation of the jumper output
head, otherwise the output head may be contaminated (do not turn on the fan during the
installation of the output head, so as to avoid large dust in the air);
7) The minimum bending radius of the laser transmission cable in non-working conditions such
as transportation and storage should not be less than 10cm, and the minimum bending radius
should not be less than 15cm when the laser is emitting light.