Wuhan Raycus Fiber Laser Technologies Co., Ltd
U
ser Guide of 1000W CW laser
Raycus User Guide |
Using the Product
21
Table 7 Power connection requirements
Model
RFL-C1000 / C1000H
Power
supply
220±10% V AC
50/60Hz
Power cord
Power cord
end
Three strands, marked L, N and PE respectively
Label
description
L
-
>Phase line (brown)
N
-
>Neutral (blue)
PE
-
>Protective earth wire (yellow green)
Note
Insert the plug at the end of the power cord into the socket marked "AC INPUT"
on the rear panel. Note that the plug has anti-reverse connection function. After
plugging it in, lock it with a lock.
4.4 Interface definition
4.4.1 Control interface
Figure 7 shows the DB25 control interface diagram:
Figure 7 DB25 control interface
The pin definitions of DB25 are as follows:
Table 8 Control interface definition
