Raycus RFL-A2005, Руководство пользователя

Страница: 19 / 20

武汉锐科光纤激光技术股份有限公司
WUHAN RAYCUS FIBER LASER TECHNOLOGIES CO. LTD.
19
Table 8 common errors and solutions
NO. error error instructions and solutions
1 Led PO not on
Laser power error.
Check DC power input and make sure Power Cord is connected
firmly; Restart laser system is a way to solve the problem.
2 Led TM/TE on
Make sure working temperature is under limited;
Check whether cooling fans are working;
Shut down laser for a while, then restart laser.
3 Led IN not on
Check connection of interlock pins;
Restart laser system is a way to solve the problem.
4 Led LD on Restart laser system is a way to solve the problem.
5 No laser emission
Check whether led LA is on,
Check whether led SI is on,
Make sure external signals are connected correctly,
Restart laser system is a way to solve the problem.
5. Warranty and Maintenance
5.1 General Warranty
Raycus warrants that all Raycus fiber delivered direct diode laser
products are conformed to applicable product specifications under normal
use and are free from defects in materials and workmanship. The warranties
start on the date of shipment from Raycus for a period of time asset forth
in the applicable purchase contracts or product specifications.
Raycus has the right to choose to repair or replace any product that
proves to be defective in materials and workmanship selectively during the
warranty period. Only products with particular defects are under warranty.
Raycus reserves the right to issue a credit note for any defective products
produced in normal conditions.
5.2 Limitations of Warranty
The warranty does not cover the maintenance or reimbursement of our
product of which the problem results from tampering, disassembling, misuse,
accident, modification, unsuitable physical or operating environment,
improper maintenance, damages due to excessive use or not following the
instructions caused by those who are not from Raycus. Customer has the
responsibility to understand and follow this instruction to use the device.
Any damage caused by fault operating is not warranted. Accessories and fiber