武汉锐科光纤激光技术股份有限公司
WUHAN RAYCUS FIBER LASER TECHNOLOGIES CO. LTD.
4
1.4
Optical Safety
Any dust on the end of the collimator assembly can burn the lens and
damage the laser.
CAUTION: If the output of the device is delivered through a lens with
an anti-reflection coating, make sure that the lens is of good quality
and clean.
CAUTION: DO NOT emit when the protective cap is not removed, or the
laser will be damaged.
1.5
Electrical Safety
a） Make sure your product is grounded through the PE line of the AC power
cord. The grounding must be firm and reliable.
WARNING: Any interruption from the protective earth will electrify
the enclosure, which may result in personal injury.
b） Make sure that the correct voltage of the DC power source is used.
CAUTION: Failure to connect the laser to the correct voltage could
damage the product.
c） There are no operator serviceable parts inside, so do not try to
remove covers, or electrical shock may be caused, and warranty will
be void.
1.6
Other Safety Rules
a） Never look into the laser output port when power is supplied to the
laser.
b） Avoid using the laser in a dim or darkened environment.
c） If this device is used in a manner not specified in this document,
